Conference Program
SURFACING – SCIENCE. PRODUCTION. PROSPECTS

Current methods of surfacing, surfacing technologies and their application

• Experience of application of European standards for certification of surfacing technologies E. Turyk (Institute of Welding, Gliwice, Poland) , I. A. Ryabtsev( E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys E.F. Perepletchikov (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Current state and prospects for development of technology of laser and hybrid surfacing V. D. Shelyagin, V. Yu. Khaskin, A. V. Bernatskii (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Repair of copper plates of crystallizers by friction stir welding G. M. Grigorenko, L. I. Avdeeva, A. Yu. Tunik, A. M. Poleshchuk, E. V. Zelenin, V. I. Zelenin, Yu. K. Nikityuk, V. A. Lukash (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Strip Cladding. Jean-Pierre van Nieuwenhoven (Voestalpine Boehler Welding Austria GmbH).
• Railway Transport – Hardfacing of Cast Manganese Crossings. Siegbert Hafenscherer (Voestalpine Boehler Welding Austria GmbH)
• Optimizing the modes of submerged-arc surfacing over layer of alloyed charge of parts of track assembly of tracked vehicles V.V. Peremitko, D. G. Nosov (Dneprodzerzhinsk State Technical University, Ukraine).
• Submerged-arc surfacing of noil over steel. T.B. Maydanchuk, V.M. Ilyushenko, A.N. Bondarenko (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Electro-slag surfacing using discrete materials manufactured by different methods. Yu. K. Kuskov, G. N. Gordan, I. L. Bogaychuk, T. V. Kayda (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Ways for improvement of technology of induction surfacing of thin steel disks. Ch.V. Pulka, O.N. Shablii, V.N. Baranovskii, V.S. Senchishin, V.Ya. Gavrilyuk (Ternopil Ivan Pulyui National Technical University, Ternopil, Ukraine).
• Energy approach in analysis of modes of micro-plasma powder surfacing. A.V. Yarovitsin (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Effect of scheme of powder input into arc on efficiency of process of plasma-powder surfacing. A.I. Som (Plasma-Master Ltd., Kiev, Ukraine)
• Wear-resistance cladding with input of nanooxides into weld pool. V.D. Kuznetsov (NTUU KPI, Kiev, Ukraine)
• Technology of surfacing with combined filler material. I.A. Bartenev (Kandagar State Technical University, Kazakhstan)
• Development and implementation of new technologies of repair and manufacture of critical parts and technological tools for metallurgical plants. I. P. Borodin, Yu.S. Shatov, A.I. Bolotov, V.E. Kryukov, A.G. Gvozdev, E.A. Peskov, V.Yu Shiryaev (STU “Vosstanovlenie”, Lipetsk, RF), A.A. Golyakevich, L.N. Orlov (“TM. Weltek” Ltd., Kiev, Ukraine)
• Peculiarities of heating of die blanks in non-consumable electroslag surfacing O. K. Kuzmenko (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Effect of pulse feeding of electrode wire on formation of deposited bead, wear-resistance and electrode material loss in CO₂ arc surfacing. I. V. Lendel, S. Yu. Maksimov, V. A. Lebedev(E. O. Paton Electric Welding Institute, Kiev, Ukraine), O. A. Kozyrko(PJSC “DMT Production”, Nikolaev, Ukraine)
• Repair of surfaced press-forms with expired life cycle N.A. Makarenko, I.O. Dyachenko (Donbas State Machine-Building Academy, Kramatorsk, Ukraine).
• Electric resistance of powder mixtures in electroslag surfacing D. A. Volkov (Donbas State Machine-Building Academy, Kramatorsk, Ukraine)

Surfacing consumables. Deposited metal. Composition, structure, properties

• Markets of flux-cored wire for welding and surfacing. Scopes and geography. A.A. Mazur, S.V. Pustovoyt (E. O. Paton Electric Welding Institute, Kiev, Ukraine).
• Structure and wear-resistance in abrasive wear of deposited metal strengthened by different type carbides. I.A. Ryabtsev¹, A.I. Panfilov², A.A. Babinets¹, I.I. Ryabtsev¹, G.N. Gordan¹, I.L. Babiychuk¹ (¹ E. O. Paton Electric Welding Institute, Kiev, Ukraine; ²OJSC “Steel Work”).
• Structure and properties of surface of railway wheels after repair by surfacing and operating loading. L.I. Markashova (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Peculiarities of technology of manufacture and application of powder strips for surfacing. A.P. Voronchuk, A.P. Zhudra, V.O. Kochura, A.V. Petrov, V.V. Fedosenko (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Effect of method for manufacture of flux-cored wire on wear-resistance of deposited metal. V.V. Chigarev (SIHE “Priazov State Technical University”, Mariupol, Ukraine), A. D. Koshevoi, D. M. Golu  (Donbas State Machine-Building Academy, Kramatorsk, Ukraine)
• New electrodes for repair surfacing of damaged lining of runner chamber of hydropower units. K.A. Yushchenko, A.V. Bulat, V.I. Samoylenko, N.Yu. Kakhovskii (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Materials and equipment for surfacing of cutters for metal hot cutting. A.P. Zhudra, A.P. Voronchuk (E. O. Paton Electric Welding Institute, Kiev, Ukraine), A.A. Fomakin, S.I. Vlikii ( EDTB of E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Repair of parts and assemblies of ore mining and smelting industry using flux-cored wires of “VELTEK” trade mark. V.P. Voytenko (PE Voytenko V. P., Dnepropetrovsk, Ukraine)
• Double-layer surfacing compounds based on Cr-Ti-C alloying system filler. E.V. Sukhovaya
• Flux-cored wires providing production of deposited metal with high seizure wear resistance. V.V. Osin (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Structure and properties of metal, deposited using flux-cored wire with charge from processed metal-abrasive wastes. I. P. Lentyugov, I. A. Ryabtsev (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Effect of magnetic-pulse treatment of discrete materials on structure of metal, deposited by elecroslag method. Yu.M. Kuskov, G.N. Gordan, L.T. Eremeeva. I.L. Bogaychuk, T.V. Kayda (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Ultrasonic treatment of Cr-Ni-Si deposited metal. Yu.I. Lopukhov, M.T. Kapkenova (East-Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan)
• Role of technological parameters of laser and laser-plasma alloying in change of structure and service properties of deposited layers of steel 38KhN3MFA. L.I. Markahova (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Possibilities of application of laser radiation for increase of quality of welding and surfacing wires. S.B. Shevchenko¹, I.V. Krivtsun¹, V.P. Slobodyanyuk², L.F. Golovko¹. ( ¹NTUU KPI, ²PJSC “PlasmaTech”)
• Effect of alloying on physical-chemical properties of fused tungsten carbides. A.I. Belyi, A.P. Zhudra, A.I. Roslyakov, V.V. Petrov (E. O. Paton Electric Welding Institute, Kiev, Ukraine), P.I. Loboda (NTUU KPI)
• WELTEK Ltd. – steps and strategy of development. A.A. Golyakevich (WELTEK Ltd.)
• Flux-cored wire for surfacing and repair of parts from carbon-manganese steels. N.A. Solovey (“SPC “Elna” Ltd.)
• Application of cobalt alloys for surfacing R. Rosert (Dr. Rosert RTC GmbH, Dresden, Germany)
• Increase of technological and service properties of disperse-hardening chromium-nickel-silicon steels in N₂+CO₂ MAG-surfacing. Yu.I. Lopukhov (East-Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan)
• Thermal synthesis of carbide-steel powders based on slurry wastes of roller-bearing steels G.A. Baglyuk, A.A. Mamonova, O.V. Bezdorozhev, D.A. Goncharuk (Institute for Problems in Materials Science, Kiev, Ukraine)
• Development of complex technology for production of parts from titanium alloys based on solid-phase processes of welding and powder metallurgy. I.A. Petrik, A.V. Ovchinnikov, A.G. Selivestrov, A.E. Kapustyan ( JSC Motor-Sich, Zaporozhe, Ukraine)
• Application of hydrogenated-dehydrogenated titanium powders in welding processes, applied in additive technologies. A.V. Ovchinnikov, T.B. Yanko, M.V. Sidorenko ( JSC Motor-Sich, Zaporozhe, Ukraine)

Use of mathematical methods for investigation of surfacing processes

• Structural scheme of procedure for calculation of stress-strain state of parts in process of surfacing and further operation I.K. Senchenkov (S. P. Timoshenko Institute of Mechanics, Kiev, Ukraine), I.A. Ryabtsev (E. O. Paton Electric Welding Institute, Kiev, Ukraine), E. Turyk(Institute of Welding, Gliwice, Poland)
• Calculation of fatigue life of cylinder parts in multi-layer surfacing and operating cyclic thermo-mechanical loading I.K. Senchenkov, O.P. Chervinko (S. P. Timoshenko Institute of Mechanics, Kiev, Ukraine), I.A. Ryabtsev  (E. O. Paton Electric Welding Institute, Kiev, Ukraine)
• Evaluation of defects in surfacing R. Rosert (Dr. Rosert RTC GmbH, Dresden, Germany)
• Modelling of residual stresses in nozzle zone of VVER-1000 reactor pressure vessel in surfacing and heat treatment E.S. Kostenevich (EDTB of E.O. Paton Electric Welding Institute)
• Effect of surfacing on stress-strain state of roller of continuous casting machine A.P. Gopkalo, V.V. Klipachevskii (Institute for Problems of Strength, Kiev, Ukraine)
• Modelling of melting process of electrodes with exothermic mixture in coating A.M. Kushchii, A.F. Vlasov (Donbas State Machine-Building Academy, Kramatorsk, Ukraine)
• Calculation method for evaluation of shape and size of weld pool in composite strip electrode cladding V.N. Matvienko, V.A. Mazur, L.K. Leshchinskii (PSTU, Mariupol)
• Modelling of residual stresses in nozzle zone of VVER-1000 reactor pressure vessel in surfacing and heat treatment E.S. Kostenevich (EDTB of E.O. Paton Electric Welding Institute)

Exhibition of equipment and surfacing materials, June 16-17th, 2015,

• Fronius Ukraine Ltd.
• Plasma-Master Ltd.
• TM. Weltec
• Departments of the E. O. Paton Electric Welding Institute
• EDTB of the E. O. Paton Electric Welding Institute
• PPWE of the E. O. Paton Electric Welding Institute