Print

PROGRAM of International Conference “TITANIUM 2018. PRODUCTION AND APPLICATION IN UKRAINE”*

Kyiv, E. O. Paton Electric Welding Institute of the NAS of Ukraine
11 Kazimir Malevich str. (Bozhenko), PWI building IV
11-13 June, 2018
11 June, Monday
14:00 – 17:00 Registration of Conference participants
17:00 – 20:00 Welcome reception (showroom, PWI building IV)  
12 June, Tuesday
09:00 – 11:00 Registration of Conference participants
09:30 – 10:00 Opening of the Conference
Prof. L. M. Lobanov
10:00 – 11:10 Plenary papers
11:10 – 11:30 Coffee break
11:30 – 13:10 Plenary papers
13:10 – 13:40 Coffee break
13:40 – 16:00 Plenary papers
11:00 – 16:00 Poster papers
17:00 – 22:00 Evening river trip on “Khashtan-5” motor ship with dinner (departure of the buses from PWI building IV at 16:15)
14 June, Wednesday
11:00 – 13:00 Visit to SE SRC “Titanium”
(departure of the buses from PWI building IV at 10:30)

Exhibition

“Production and welding of titanium” will take during Conference in scope of the PWI exposition in showroom of PWI building IV
June 11, 14:00 - 17:00
June 12, 09:00 - 16:00

Proceedings with the Conference Program will be published before the Conference start.

The Conference papers will be published in form of separate collection of articles before September 30, 2018 (the papers on materials of presentations are accepted before June 30, 2018).

20 minutes will be given to present the plenary paper (15 minutes for presentation and 5 minutes for discussion).
*The Program can be changed.

PLENARY PAPERS

Chairman Prof. S.V. Akhonin
10:00-10:30
The main tendencies in development of powder metallurgy and titanium 3D technologies

Ivasishin O.M.
G.V. Kurdyumov Institute for Metal Physics of the NAS of Ukraine, Kyiv
10:30-10:50
Some tendencies in development of new titanium-based alloys

Firstov S.A.
I.N. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
10:50-11:10
Development of metallurgy of titanium and alloys on its basis in Ukraine

Akhonin S.V.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Chairman Dr. V.A. Kostin
11:30-11:50
EBW of thin-wall corrugated bearing airframes of titanium alloy and evaluation of their fatigue resistance

Khripko K.S., Nesterenkov V.M., Orsa Yu.V., Makhnenko O.V.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
11:50-12:10
Titanium smelting in the laboratory disk bottom casting furnace

Panov S.P.1, Brown A.G.2, Yanko T.B3
1Astron Ltd, New Zealand
2Astron Ltd., Minyip, Australia
3State Titanium Research & Design Institute, Zaporizhzhya, Ukraine
12:10-12:30
Application of titanium in additive technologies

Ovchinnikov A.V.1, Brener V.A.2
1Zaporozhye National Technical University
2PJSC «Institute of Titanium», Zaporozhye
12:30-12:50
Titanium and additive manufacture

Kovalchuk D.V.
JSC NVO «Chervona Hvilya», Kyiv
12:50-13:10
Effect of power supply technologies in 3D printing on structure and properties of parts of Ti-6Al-4V alloy

Klochikhin V.V., Pedash A.A., Mitina T.A., Shylo V.G.
JCS «Motor Sich», Zaporozhye
Chairman Dr. A.V. Ovchinnikov
13:40-14:00
Conceptual solutions of production cycle in manufacture of parts from titanium alloys using additive technologies

Yanko T.B.1, Dotsenko R.B.2
1PJSC «Institute of Titanium», Zaporozhye
2SPE «ELECTROMASH», Zaporozhye
14:00-14:20
High speed friction welding of titanium alloys – structure and properties of joints

Damian Miara1, Jolanta Matusiak1, Adam Pietras1, Maciej Krystian2
1Instytut Spawalnictwa, Gliwice, Poland
2Austrian Institute of Technology, Vienna, Austria
14:20-14:40
Effect of structure-phase state of titanium alloys on sensitivity of their mechanical properties to method and testing speed

Markovskii P.E.
G.V. Kurdyumov Institute for Metal Physics of the NAS of Ukraine, Kyiv
14:40-15:00
Complexly doped alloys based on titanium aluminides γТiАl/α2Тi3Аl

Firstov S.A.1, Gornaya I.D.1, Podrezsov Yu.N.1, Bondar A.A.1, Romanko P.M.1, Goltvyanitsa V. S.2, Sheremetev A. V.3
1I.N. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
2«Rial» LLC, Zaporozhye
3SE Ivchenko-Progress, Zaporozhye
15:00-15:20
Theoretical description of equilibrium diagrams and phase transformations in titanium alloys of titanium-aluminum system

Kostin V.A., Grigorenko G.M., Grigorenko S.G.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
15:20-15:40
Peculiarities of production of strip cast ingots of VT1-0 grade or GRADE 2 of ungraded spongy titanium

Kalinyuk A.N., Derecha A.Ya., Telin V.V., Kolyada A.F., Kostenko V.I., Ivanov N.M.
«Strategiya BM» LLC, Kyiv
15:40-16:00
Microstructure and properties of multi-layer materials based on Ti-6Al-4V alloy produced by powder technology

Ivasishin O.M.1, Markovskiy P.E.1, Savvakin D.G.1, Stasyuk A.A.1, Prikhodko S.V.2
1G.V. Kurdyumov Institute for Metal Physics of the NAS of Ukraine, Kyiv
2Material Science and Engineering department, University of California, Los-Angeles, USA

POSTER PAPERS

Interaction of thermal cycle of argon-arc welding on structure and properties of pseudo b-titanium alloys
Akhonin S.V., Belous V.Yu., Selin R.V.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
TIG welding of high-strength pseudo b-titanium alloy VT19
Akhonin S.V., Belous V.Yu., Selin R.V., Petrichenko I.K.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Development of new alloys and technology of their production using electron bean melting method
Akhonin S.V., Berezos V.A., Belous V.Yu.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Peculiarities of production of large ingots of titanium aluminides in electron beam units
Akhonin S.V.1, Severin A.Yu.1, Berezos V.A.1, Pikulin A.N.1, Erokhin A.G.2
1E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
2SE SRC «Titanium» of E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Production of aircraft parts of high-temperature sintered titanium alloys
Boguslaev V.A.1, Zhemanyuk P.D.1, Ovchinnikov A.V.2, Lekhovitser Z.V.1, Bykov I.O.1
1JCS «Motor Sich», Zaporozhye
2Zaporozhye National Technical University
Risk assessment is a key to development of healthy working environment in titanium production
Bondarenko Yu.K.1,2, Loginova Yu.V.1,2, Kovalchuk O.V.1,2, Artyukh K.O.1,2
1E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv, Ukraine
2SE STC «SEPROZ» of the NAS of Ukraine, Kyiv
Heat-resistant titanium coating for reduction of detrimental impurities in weld metal
Glushko A.V.
National Technical University «Kharkiv Polytechnic Institute»
Phase transformations in Ti-6Al-4V alloy during laser forming of thin-walled parts
Golovko L.F., Kaglyak O.D., Lutai A.N., Klyuchnikov Yu.V.
NTUU «Igor Sikorsky Kyiv Polytechnic Institute», Kyiv
Effect of low-modulus intermetallic phase Ti3Sn on mechanical properties of eutectic alloys of Ti-Si-Sn system
Gorna I.D., Bulanova M.V., Valuyska K.O., Bega M.D., Koval O.Yu., Kotko A.V., Evich Ya.I., Firstov S.O.
I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
Effect of Sc on properties of biocompatible titanium alloys Ti-23Nb-2Zr-Х
Gorna I.D.1, Valuyska K.O.1, Talash V.M.1, Vdovichenko O.V.1, Romanko P.M.1, Kotko A.V.1, Bega M.D.1, Goltvyanitsa V.S.2, Firstov S.O.1
1I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
2«Rial» LLC, Zaporozhye
Electron beam melting of Ti-Nb-Si-Zr system alloys
Grechanyuk N.I., Kulak L.D., Kuzmenko N.N., Smashnyuk Yu.A.
I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
Influence of morphology and fractional composition on microhardness and plasticity of deposited layers from powders of VT20 grade titanium alloy
Duryagina Z.A., Trostyanchin A.M., Lemishka I.A.
Lviv Polytechnic National University
Increase of repairability of compressor blades with erosion-resistant TiN coating
Efanov V.S., Petrik I.A., Balandin V.N., Mylenko A.A., Marchenko Yu.A.
JCS «Motor Sich», Zaporozhye
Titanium powders. Development of perspective technologies
Zhangguiyan1, Chervonyi I.F.2, Sushchinskiy A.D.2
1ZS Titanium Industry Co. Ltd, China
2Zaporozhye, Ukraine
Formation of dissimilar joints of Ti-46Al-2Nb-2Cr alloy with titanium alloy ВТ3-1 in friction welding
Zyakhor I.V., Zavertanny M.S., Kapitanchuk L.M., Alekseenko І.І.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Expansion of scope of application of titanium alloys
Kapustyan O.Ye., Nikolaev V.M., Ovchinnikov O.V.
Center «Titanium Zaporozhye», Zaporozhye
Peculiarites of formation of structure in the parts produced by the additive manufacuring on xBeam 3D printer using titanium wire VT6
Kovalchuk D.V.1, Grigorenko G.M.2, Tunik A.Yu.2, Adeeva L.I.2, Grigorenko S.G.2
1JSC NVO «Chervona Hvilya», Kyiv
2E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Utilizable casting waste in the production of titanium mold castings and ingots
Kolobov G.A.1, Lunev V.V.2, Pavlov V.V.3
1Zaporozhye State Engineering Academy
2Zaporozhye National Technical University
3PJSC «Institute of Titanium», Zaporozhye
Thermal resistance to oxidation of powders of titanium compounds (TiN, TiC, ТіВ2)
Kudin V.G., Makara V. A.
Taras Shevchenko National University of Kyiv
New heat-resistant titanium alloys of Ti-Al-Si-Zr system for operation at temperatures up to 700 0С
Kulak L.D., Kuzmenko M.M., Shevchenko O.M., Tereshchenko T.M.
I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
Flash butt welding of γ-TiAl alloy with titanium alloy VT5 using nano-layer foils
Kuchuk-Yatsenko S.I., Zyakhor I.V., Nakonechnyi A.O., Zavertanny M.S., Kapitanchuk L.M.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Video system for automatic control of parameters of liquid metal in electron beam remelting of titanium sponge
Lankin Yu.N., Soloviev V.G., Sushiy L.F., Osechkov P.P.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Dependencies of chagne of Ti-TiBn alloy structure in area of welded joint produced by electron beam welding
Loboda P.I., Zvorykin K.O., Zvorykin V.L., Vrzhizhevsky E.L., Romanenko Yu.N.
NTUU «Igor Sikorsky Kyiv Polytechnic Institute», Kyiv
New instruments of computer design of Ti-Ir-Ru and Ti-C-V alloy system with change of three-phase reaction type
Lutsyk V.I.1,2, Vorobeva V.P.1
1Institute of Physical Materials Science of SB RAS, Ulan-Ude, Russia
2Buryat State University, Ulan-Ude, Russia
Structural peculiarities of weld formation in brazing of titanium alloys with aluminum brazing filler materials
Maksimova S.V., Voronov V.V.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Structure forming of brazed joints of titanium alloy VT6
Maksimova S.V., Kolomiitsev V.E.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Structure and properties of titanium-aluminum joints made by laser welding
Markashova L.I., Shelyagin V.D., Berdnikova E.N., Khaskin V.Yu., Bernatskiy A.V., Polovetskiy E.V., Alekseenko T.A.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Results of full-scale experiments of large-sized blades of gas turbine engine fan, repaired by fragment welding-in
Markov I.B., Petrik I.A., Seliverstov A.G.,Marchenko Yu.A.
JCS «Motor Sich», Zaporozhye
Evaluation of structure anisotropy and mechanical properties of billets from titanium alloys obtained by additive growing method
Marchenko Yu.A.1, Skrebtsov A.A.2, Mitina T.A.1, Efanov V.S.1, Markov I.B.1
1JCS «Motor Sich», Zaporozhye
2Zaporozhye National Technical University
Friction stir welding of titanium alloys – opportunities for application
Damian Miara, Jolanta Matusiak, Adam Pietras
Instytut Spawalnictwa, Gliwice, Poland
Titanium-carbon composites for cored electrodes
Mishchenko D.D.1, Bogachenko A.G.1, Galinich V.I.1, Neylo I.A.1, Braginets V.I.1, Sudavtsova V.S.2
1E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
2I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
Development of technology of production of titanium alloys with set properties by step rolling metal
Mushegyan V.O.
SE STC «Paton-Armeniya» of the E.O. Paton Electric Welding Institute of the NASU, Kyiv
Evaluation of the possibility of applying layer-by-layer formation technology by plasma surfacing of parts made of titanium alloys in the manufacture of helicopter parts and GTE
Petrik I.A., Chigileichik S.L., Mitina T.A., Marchenko Yu.A., Gnatenko M. O.
JCS «Motor Sich», Zaporozhye
Intensification of nitriding under condition of preliminary surface plastic deformation of titanium alloy VT22
Pogrelyuk I.M.1, Sheykin S.E.2, Lavrys S.M.1, Rostotskiy I.Yu.2
1H.V. Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Lviv
2V.N. Bakul Institute for Superhard Materials of the NAS of Ukraine, Kyiv
Peculiarities of arc control by magnetic field in argon-arc surfacing of surface of wing elements
Prilutskii V.P.1, Akhonin S.V.1, Shvab S.L. 1, Antonyuk S.L.2
1E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
2SE «Antonov», Kyiv
Technological and metallurgical features of melting of titanium alloy ingots in electroslag chamber type furnace
Protokovilov I.V., Nazarchuk A.T., Petrov D.A., Porokhonko V.B.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Control of formation of welded joint in electroslag welding of titanium
Protokovilov I.V., Porokhonko V.B.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Production of titanium-based alloys by metal-thermal reduction of oxide titanium-containing raw materials
Protsenko V.M.
Zaporozhye State Engineering Academy
Influence of boride component on microstructure and mechanical properties of metal matrix titanium-based composites
Stasyuk O.O.1, Baglyuk G.A.2, Savvakin D.G.1
1G.V. Kurdyumov Institute for Metal Physics of the NAS of Ukraine, Kyiv
2I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
Thermal-dynamic properties of alloys of Ti-Sb(Ce) and Ti-Sb-Ce systems
Sudavtsova V.S.1, Pastushenko K.Yu.1, Ivanov M.I.1, Shevchenko M.A.1, Kudin V.G.2
1I.M. Frantsevich Institute of Problems of Material Science of the NAS of Ukraine, Kyiv
2Taras Shevchenko National University of Kyiv, Kyiv
Effect of technological parameters of electron beam welding on the structure and properties of Ti-Al system intermetallic
Taranova T.G., Piskun N.V., Vrzhizhevskiy E.L., Grigorenko S.G., Bogaychuk I.L., Statkevich I.I.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Diffusion welding in vacuum of intermetallic alloy γ-TiAl with heat-resistant Ni-based alloy
Ustinov A.I., Petrushinets L.V., Falchenko Yu.V., Melnichenko T.V.
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv
Effect of diffusion saturation in controlled gas environment on mechanical properties of titanium alloys
Fedirko V.M., Trush V.S., Lukyanenko O.G., Pogrelyuk I. M.
H.V. Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Lviv
Titanium is a promising material for manufacture of components of medical friction pairs
Sheykin S.E.1, Pashchenko E.O.1, Pogrelyuk I.M.2, Rostotskiy I.Yu.1, Efrosinin D.V.1
1V.M. Bakul Institute for Superhard Materials of the NAS of Ukraine, Kyiv
2G.V. Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Lviv
Diffusion saturation steel surface with titanium
Shumikin S.A., Kapustyan A.E.
Zaporozhye National Technical University
>